HP ProLiant EC200a, User Manual

Page: 23 / 73

Hardware options installation 23
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Installing the server in the cradle
Process overview:
1.
Prepare the server for hardware installation or removal (on page 16 ).
2.
If the server is installed in a wall mount or on a storage expansion unit:
o
Remove the server from the wall mount (on page 17 ).
o
Remove the server from the storage expansion unit (on page 17 ).
3.
Install the server in the cradle (on page 23 ).
4.
Prepare the server for operation (on page 16 ).
Install the server in the cradle
1.
Place the cradle on a level, sturdy surface.
2.
Open the latches on the cradle.
3.
Place the server in a vertical position with the rear panel facing the cradle latches.