HP ProLiant DL580 Generation 3, User Manual

Page: 112 / 192

112 HP ProLiant DL580 Generation 3 Server User Guide
NOTE: If the total amount of memory has changed, the POST
Memory Test will run automatically. Additional memory testing is not
necessary.
3. Select the AMP mode ("Selecting the AMP mode" on page 112 ).
POST memory test
1. Power on the server ("Powering up the server" on page 37 ).
2. Press the F9 key, when prompted, to enter RBSU.
3. Select Advanced Options.
4. Change POST Speed Up to Disable.
5. Press any key to return to the RBSU main menu.
6. Press the F10 key, when prompted, to exit RBSU. The server reboots and
tests all memory in the system.
7. Once the memory has been tested, re-enable POST Speed Up for faster
system boot, if desired.
ROM-based diagnostics
1. Power on the server ("Powering up the server" on page 37 ).
2. Press the F10 key, when prompted, to enter the System Maintenance menu.
3. Select Diagnostics.
4. Run the Memory Diagnostics.
5. Once the memory has been tested, exit the utility and reboot.
6. Select the AMP mode ("Selecting the AMP mode" on page 112 ).
Selecting the AMP mode
1. Upon reboot, press the F9 key, when prompted, to enter RBSU.
2. Select System Options.
3. Select Advanced Memory Protection.
4. Select the desired memory mode.