HP ProLiant DL560 Gen8 User Manual Download

Page: 31 / 102

Setup 31

Install the power cord anchors.

Secure the cables to the cable management arm.

IMPORTANT:

When using cable management arm components, be sure to leave enough slack

in each of the cables to prevent damage to the cables when the server is extended from the rack.

Connect the power cord to the AC power source.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.

•

Unplug the power cord from the power supply to disconnect power to the equipment.

•

Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

Summary of Contents for ProLiant DL560 Gen8







































































































Search results

Summary of Contents for ProLiant DL560 Gen8

Reviews:

Related manuals for ProLiant DL560 Gen8

Brands by name

Popular brands

HP ProLiant DL560 Gen8, User Manual

Search results

Summary of Contents for ProLiant DL560 Gen8

Reviews:

Related manuals for ProLiant DL560 Gen8

Brands by name

Popular brands