If you intend to use a seneye USB connected directly via USB to a PC please use
these
instructions
.
Thank you
for purchasing a seneye web server (SWS). Please read the following instructions
carefully in order get your SWS working.
DO NOT PLUG IN OR TURN ON YOUR SWS BEFORE READING THESE INSTRUCTIONS
DO NOT CONNECT THE SWS TO THE EDIMAX WI-FI ADAPTOR UNTIL INSTRUCTED
IF YOU HAVE PURCHASED ANY PART OF THE SYSTEM 2nd HAND PLEASE CONTACT
US
Stage 1 - Registering an account on seneye.me
If you already have a seneye account please proceed to stage 2.
If you a new user please register an account at www.seneye.me. You will need to use the E-
mail address that you want your alerts sent too.
Once you have registered, please ignore any details on the Welcome E-mail that mention
downloading the seneye connect application. Seneye connect software is not needed
because everything will be done using your SWS. Once your registration is complete, please
continue through these instructions.
Stage 2 - Registering the SWS to your account
Please go to the following link to register your SWS to your account.
http://my.sws.li
You will be asked for your E-mail address, password, and the details that are on the sticker on
the SWS packaging. An example of this is shown below:
Please note that O is the letter O and not the number 0 in the ID
