HP ProLiant DL388, User Manual

Page: 10 / 127

Component identification 10
Item Description Status
1
NIC link/activity LED Green = Network link
Flashing green = Network link and activity
Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
(" Rear panel LEDs and buttons " on page
12 )
2
Power cap To determine Power cap status, see
"Systems Insight Display LED combinations
(on page 10 )."
3
AMP status Green = AMP mode enabled
Amber = Failover
Flashing amber = invalid configuration
Off = AMP modes disabled
—
All other LEDs Off = Normal
Amber = Failure
For detailed information on the activation
of these LEDs, see "Systems Insight Display
LED combinations (on page 10 )."
Systems Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED
indicate system status.
Systems Insight Display
LED and color
Health LED System power
LED
Status
Processor (amber)
Red Amber One or more of the following conditions may
exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during
POST
Processor (amber)
Amber Green Processor in socket X is in a pre-failure
condition.
DIMM (amber)
Red Green One or more DIMMs have failed.
DIMM (amber)
Amber Green DIMM in slot X is in a pre-failure condition.
Overtemperature (amber) Amber
Green The Health Driver has detected a cautionary
temperature level.
Overtemperature (amber) Red
Amber The server has detected a hardware critical
temperature level.
Fan (amber)
Amber Green One fan has failed or has been removed.
Fan (amber)
Red Green Two or more fans have failed or been
removed.