HP ProLiant DL160 G5P Page 55 Software Configuration Manual Download

Page: 55 / 64

NOS installation 55

SUSE Linux Enterprise Server 10 Installation

Section1. Installing SUSE Linux Enterprise Server 10

Turn on the server and insert the SUSE Linux Enterprise Server 10 (SLES10) CD 1.

Reboot the system to the SLES10 CD 1.

Select Installation, then press

Enter

to proceed to the customization of your installation.

Section2. Customizing the Installation

Language

Select the language you prefer for the installation, then click

to continue.

Media Check

Skip this stage of the installation. Click

to continue.

License Agreement

Read the license agreement. If the terms of the agreement are acceptable, click

Yes

, I agree to the

license agreement, then click

to continue.

Installation Mode

Click New Installation, then click

to continue.

Clock and Time Zone

Modify the Clock and Time Zone settings, then click

to continue.

Installation Setting

Review the default installation settings and modify them to meet your network environment.

Click

to initialize the installation process.

Click

Install

to start the file copying.

The system automatically reboots once the first part of the file copying is completed. You may be
prompted to insert the rest of the SLES10 CD-ROMs, depending on the packages you have

chosen to install.

Section3. Completing the installation

Hostname and Domain Name

Set host name and domain name, then click

to continue.

Password for the System Administrator

Enter a root password consisting of at least six alphanumeric characters, then click

to continue.

Network Configuration

Review the Network Configuration settings and verify that they fit your environment, then click

continue.

Test Internet Connect

Review the Network Configuration settings and verify that they fit your environment, then click

continue.

Summary of Contents for ProLiant DL160 G5P

































































Search results

Summary of Contents for ProLiant DL160 G5P

Reviews:

Related manuals for ProLiant DL160 G5P

Brands by name

Popular brands

HP ProLiant DL160 G5P, Software Configuration Manual

Search results

Summary of Contents for ProLiant DL160 G5P

Reviews:

Related manuals for ProLiant DL160 G5P

Brands by name

Popular brands