NOS installation 45
To manage different drives and partitions:
1.
Click
Start | Programs | Administrative Tools | Computer Management
.
2.
Double-click
Storage
in the tree, then click
Disk Management
. The Write Signature and Upgrade
wizard starts if you have new hard drives with no signatures on them.
3.
Follow the on-screen instructions to create the signature.
4.
Select the available hard disk space on the graphic and use menus to create additional
partitions.
5.
Format all partitions that are not yet formatted.
6.
Close the Computer Management window.
Phase 3 - Adding Windows Terminal Services
1.
Click
Start | Settings | Control Panel | Add or Remove Programs
.
2.
Click
Add/Remove Windows Components
.
3.
Locate then select the Terminal Services checkbox, then click
Next
.
4.
Select the mode you want to use, then click
Next
. There are two mode options: Remote
administration mode and Application server mode.
NOTE:
The following instructions are based on the application server mode. Please note the
licensing requirement listed on the screen for this mode. Consult with your Microsoft representative
for setting the licensing server.
5.
Select the default permissions for application compatibility, then click
Next
.
6.
Click
Next
to accept the support tools and administrator tools settings.
7.
If prompted, insert the Windows NOS CD-ROM.
8.
Click
Finish
to close the wizard.
9.
Click
Yes
to reboot the system. Be sure to remove the Windows NOS CD-ROM from the drive.
10.
After the system reboots, log on to the system.
11.
Click
Start | Settings | Control Panel | Administrative Tools
.
12.
Check that the following services are now available:
○
Terminal Services Client Creator
○
Terminal Services Configuration
○
Terminal Services Manager
To create the client installation diskettes:
1.
Double-click
Terminal Services Client Creator
.
2.
Select the appropriate client type for your environment.
3.
Click
Format disk
if needed.
4.
Checks the numbers of disks required and label them as Terminal Services for […] Disk [x/y].
5.
Click
OK
to proceed.
6.
Follow the on-screen instructions to create the diskette copies.
7.
Click
OK
at the [y] floppies were created… screen.
8.
Click
Cancel
to close the Create Installation Disks utility.
