HP ProDesk 400 G3 Small Form Factor Page 77 Maintenance And Service Manual Download | Manualshive

Page: 77 / 131

background image

Computer seems to be locked up.

Cause

Solution

Program in use has stopped responding to commands.

1.

Use the task manager to close programs that do not
respond.

2.

Attempt the normal Windows “Shut Down” procedure. If this
fails, press the power button for four or more seconds to
turn off the power. To restart the computer, press the power
button again.

Solving media card reader problems

Media card will not work in a digital camera after formatting it in Windows.

Cause

Solution

By default, Windows will format any media card with a capacity
greater than 32MB with the FAT32 format. Some digital cameras
use the FAT (FAT16 & FAT12) format and can not operate with a
FAT32 formatted card.

Either format the media card in the digital camera or select FAT
file system to format the media card in a computer with Windows.

A write-protected or locked error occurs when attempting to write to the media card.

Cause

Solution

Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory
Stick/PRO card.

If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.

Can not write to the media card.

Cause

Solution

The media card is a read-only memory (ROM) card.

Check the manufacturer’s documentation included with your card
to see if it writable. Refer to the previous section for a list of
compatible cards.

Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory
Stick/PRO card.

If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.

Unable to access data on the media card after inserting it into a slot.

Cause

Solution

The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.

Ensure that the card is inserted properly with the gold contact on
the correct side. The green LED will light if inserted properly.

Solving media card reader problems

69

«
...
75
76
77
78
79
...
»

Summary of Contents for ProDesk 400 G3 Small Form Factor




































































































































Reviews:

No comments

Related manuals for ProDesk 400 G3 Small Form Factor

6275 - PC 300 GL

Brand: IBM Pages: 88

Brand: Medion Pages: 2

Brand: Biostar Pages: 60

Brand: Aaeon Pages: 90

Brand: Stahl Pages: 24

Brand: Moxa Technologies Pages: 27

Brand: Sun Microsystems Pages: 45

Firestorm 1Z490X

Brand: ACE COMPUTERS Pages: 42

Brand: Asus Pages: 54

Brand: Asus Pages: 70

AAEON BOXER-6710

Brand: Asus Pages: 75

Brand: Asus Pages: 70

Brand: Asus Pages: 50

Brand: Asus Pages: 64

Brand: Asus Pages: 70

Brand: Asus Pages: 62

Brand: Asus Pages: 71

Brand: Asus Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands