5.
Remove the two Phillips screws
(2)
that secure the module to the PCIe card.
6.
Lift the module to a 45-degree angle, and then pull it away to remove it from the socket
(3)
.
7.
To install a WLAN module in the socket on the PCIe card, noting the notch
(1)
in the socket, insert the
module into the socket
(2)
.
8.
Press the module down into place
(3)
.
9.
Tighten the two Phillips screws
(4)
that secure the module to the PCIe card.
46
Chapter 5 Removal and replacement procedures: Microtower
