Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Using the CLI To List Current SNMP Trap Receivers.
This command lists the currently configured trap receivers and the setting for
authentication traps (along with the current SNMP community name data —
see “SNMP Communities” on page 12-12).
Syntax:
show snmp-server
Displays current community and trap receiver data.
In the next example, the
show snmp-server
command shows that the switch
has been previously configured to send SNMP traps to management stations
belonging to the “public”, “red-team”, and “blue-team” communities.
Example of
Community
Name Data (See
page 12-12.)
Example of Trap
Receiver Data
Authentication
Trap Setting
Figure 12-9. Example of Show SNMP-Server Listing
12-21
Summary of Contents for ProCurve Series 2810
Page 2: ......
Page 3: ...ProCurve Series 2810 Switches July 2006 Management and Configuration Guide ...
Page 56: ...Using the Menu Interface Where To Go From Here This page is intentionally unused 3 16 ...
Page 240: ...Port Trunking Port Status and Configuration This page is intentionally unused 11 26 ...
