Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
[no] snmpv3 targetaddress <
addr-name>
params <
params-name
>
<
IP-Addr
>
max-msg-size<
size
>
The maximum number of bytes of length a message to
this target can be. ( Default:1472)
taglist <
tag-params
>
Set list of values used to select this entry from
snmpNotifyTable
.
Note
: You are only allowed up to 103 characters for this value.
[no] snmpv3 params <
params-name
> user <
user-name
>
Add or delete a user parameter for use with target
address. The params-name must match the
parms-name
in the
targetaddress
command. The
user-name
should be
a User from the user table. For more information on
users see “SNMP Version 3 Users” on page 12-8
A complete
params
command must also have a sec-model
and msg-processing entry.
< sec-model < ver1 | ver2c | ver3 >>
This established the security model to use for messages
passed to the targetaddress. IF ver3 is used then the
msg-processing must also be ver3.
< msg-processing < ver1 | ver2c | ver3> [noaut | auth | priv >
Establish the msg-processing for algorithm for
messages passed to the target address. If
ver3
is used
and
sec-model
is
ver3
then you must select a security
services level
(
< noauth | auth | priv >
)
tagvalue
matches
taglist
value.
params
value matches
params
name.
Both
ver3
means you must select a
security service level.
Figure 12-8. Example of SNMPv3 Configuration Session
12-19
Summary of Contents for ProCurve Series 2810
Page 2: ......
Page 3: ...ProCurve Series 2810 Switches July 2006 Management and Configuration Guide ...
Page 56: ...Using the Menu Interface Where To Go From Here This page is intentionally unused 3 16 ...
Page 240: ...Port Trunking Port Status and Configuration This page is intentionally unused 11 26 ...