HP ProCurve 8116fl, Installation And Getting Started Manual

Page: 21 / 134

Introducing the ProCurve Series 8100fl Switch
Front of the Switch
Table 1-6. 1-Port X2 10GbE Module (J8736A) LEDs
1-Port X2 10GbE Module LED Color State Meaning
Transceiver
slot cover
Link and
Activity LEDs
Link Green
Orange
n/a
Solid
Flashing
Off
Link is up
Self-test failure or unsupported
transceiver. See Error Log for
details.
No connector is plugged into the
port.
Activity
(Act) Green
Green
n/a
Flashing
Solid
Off
Transmitting data. Blink rate
indicates traffic utilization of the
port.
Traffic exceeds 90% of link
capacity.
No connector is plugged into the
port, or no traffic is being passed
through the port.
Status LED
Link and
Activity
(both port
LEDs
together) Orange/
Green/
Off Solid Orange (0.5
secs), then Solid
Green (1.5 secs),
and then Off A transceiver has been correctly
inserted into the transceiver port.
After the insertion test, the LEDs
will remain Off until a network
cable is inserted into the
transceiver and the LEDs follow
their normal operational behavior.
Link, Activity
and Status
(all module
LEDs
together) Orange/
Green/
Off Solid Orange (0.5
secs), then Solid
Green (1.5 secs),
and then Off The module is receiving initial
power due to being inserted into
the slot, and/or due to the slot being
enabled via the CLI.
Status n/a
Green
Green
Amber
Off
Flashing
Solid
Flashing
No power to the module.
Module is powering up and
downloading operating software.
Software image loaded
successfully.
Self-test failure.
N o t e
This module’s discontinuance is in Spring 2007. The 2-Port X2 10Gbe Module
(J8737A) shown on
page 1-12 , provides functionally-equivalent X2
media-flexible connectivity in a two port package.
Int
rod
uci
ng th
e ProCurve
Series 8100fl Switch
1-11