HP ProCurve 6120G/XG, Configuration Manual

Page: 500 / 662

Monitoring and Analyzing Switch Operation
Traffic Mirroring
Configuration Steps
N o t e s
If mirroring has already been enabled on the switch, the Menu screens will
appear differently than shown in this section.
1. From the Main Menu, select:
2. Switch Configuration...
3. Network Monitoring Port
Switch Configuration - Network Monitoring Port
Monitoring Enabled [No] : No
Actions-> Cancel Edit Save Help
Select whether to enable traffic monitoring.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.
Enable mirroring by
setting this parameter
to “Yes”.
Figure B-19. The Default Network Mirroring Configuration Screen
2. In the Actions menu, press
[E]
(for
Edit
).
3. If mirroring is currently disabled for session 1 (the default), then enable
it by pressing the Space bar (or
[Y]
) to select
Yes
.
4. Press the down arrow key to display a screen similar to the following and
move the cursor to the
Monitoring Port
parameter.
B-30