HP ProCurve 1810G, Management And Configuration Manual

Page: 47 / 80

5-5
Security
Secure Connection
2. Select the protocol to use, based on the server type that the certificate is stored on:
TFTP
or
HTTP
.
3. For an HTTP upload, browse for the file on your local computer or network.
For a TFTP upload, enter the
Server IP
address, and specify the
File Name
(full path without the
server IP address).
4. From the
Update Type
field on the File Download page, select one of the following:
• SSL Trusted Root Certificate PEM File : SSL Trusted Root Certificate File (PEM Encoded)—An
SSL certificate that has been digitally signed by a certificate authority.
•
SSL Server Certificate PEM File
: SSL Server Certificate File (PEM Encoded)—An SSL certificate
that has been signed by another server.
• SSL DH Weak Encryption Parameter PEM File or SSL DH Strong Encryption Parameter PEM File —
These can be downloaded from a TFTP server only. DH certificates provide the algorithms for
encrypting key exchanges and are used independent of the certificate. The weak version uses
a cipher strength of 512 bits and the strong version uses a cypher strength of 1024 bits. Browser
settings determine which DH file parameters are requested at the start of the SSL session.
5. Click Download .
To view that status of the update, you can view the
Status > Log
page.
6. To return to the Secure HTTP Configuration page, click
Security > Secure Connection
in the
navigation pane.
7. To enable the HTTPS admin mode, select
Enable
from the
HTTPS Admin Mode
field, and then click
Apply
.
Generating Certificates
To have the switch generate the certificates:
1. Click Generate Certificates .
The page refreshes with the message “Certificate has been generated.”
2. Click Apply to complete the process.
When complete, the page refreshes with the message “No certificate generation in progress” and
the
Certificate Present field displays as True .
N o t e
When a certificate is present a Delete button appears to enable deleting the certificate.