manualshive.com logo in svg

HP ProCurve 1600M, Management And Configuration Manual

Share
Download
HP ProCurve 1600M Management And Configuration Manual Download Page 495

File Transfers 

Copying Software Images 

Downloading from Either Flash in the Source Switch to Either Flash 
in the Destination Switch.  

Syntax: 

copy tftp flash < 

ip-addr 

> < /os/primary > | < /os/secondary > [ primary |

secondary ]

This command (executed in the destination switch) gives you 
the most options for downloading between switches. If you do 
not specify either a primary or secondary flash location for 
the destination, the download automatically goes to primary 
flash. 

For example, to download a software file from secondary flash in a switch 
with an IP address of 10.28.227.103 to the secondary flash in a destination 
switch, you would execute the following command in the destination switch’s 
CLI: 

Figure A-9. Switch-to-Switch, from Either Flash in Source to Either Flash in 

Destination 

Using PCM+ to Update Switch Software 

ProCurve Manager Plus includes a software update utility for updating on 
ProCurve switch products. For further information, refer to the 

Getting 

Started Guide 

and the 

Administrator’s Guide

, provided electronically with 

the application. 

Copying Software Images 

Using the CLI commands described in this section, you can copy software 
images from the switch to another device using tftp, xmodem or usb. 

N o t e  

For details on how switch memory operates, including primary and secondary 
flash, refer to Chapter 6, “Switch Memory and Configuration”. 

A-23 

Summary of Contents for ProCurve 1600M



















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands