HP ProCurve 1600M, Management And Configuration Manual

Page: 243 / 690

Port Status and Configuration
Using Friendly (Optional) Port Names
For example, if you configure port A1 with a friendly port name:
This command sequence
saves the friendly port name
for port A1 in the startup­
config file. The name entered
for port A2 is not saved
because it was executed after
write memory .
In this case, show config lists
only port A1. Executing write
mem after entering the name for
port A2, and then executing
show config again would result
in a listing that includes both
Listing includes friendly
port name for port A1
only.
Figure 10-18. Example Listing of the Startup-Config File with a Friendly Port Name Configured (and Saved)
10-23