HP ProBook x360 435 G7, Maintenance And Service Manual

Page: 40 / 92

Table 5-3 Touchpad description and part number
Description Spare part number
NOTE: The touchpad cable is available in the Cable Kit, spare part number M03431-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 29 ).
2. Remove the bottom cover ( Bottom cover on page 29 ).
3. Remove the battery (see Battery on page 30 ).
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Lift the protective shielding from the top of the touchpad (2).
3. Remove the four Phillips M2.0 × 3.0 screws (3) that secure the touchpad to the computer.
4. Remove the Phillips M1.6 × 2.0 screw (4) that secures the touchpad to the computer.
5. Remove the touchpad from the computer (5).
Reverse this procedure to install the touchpad.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-4 Solid-state drive descriptions and part numbers
Description Spare part number
512 GB, PCIe, TLC L85360-002
512 GB, PCIe, value L85364-002
32 Chapter 5 Removal and replacement procedures for authorized service provider parts