background image

Table 2-1

  Right-side components and their descriptions (continued)

Component

Description

(3)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component, 
or a high-speed High-Definition Multimedia Interface (HDMI) 
device.

(4)

USB SuperSpeed port

Connects a USB device, provides high-speed data transfer, and 
(for select products) charges small devices when the computer 
is on or in Sleep mode.

(5)

USB Type-C SuperSpeed port and DisplayPort™ 
connector

Connects a USB device, provides high-speed data transfer, and 
(for select products) charges small devices when the computer 
is on or in Sleep mode.

NOTE:

Cables, adapters, or both (purchased separately) might 

be required.

- and -

Connects a DisplayPort device that has a USB Type-C connector, 
providing display output.

(6)

Battery light

When AC power is connected:

White: The battery charge is greater than 90%.

Amber: The battery charge is from 0 to 90%.

Off: The battery is not charging.

When AC power is disconnected (battery not charging):

Blinking amber: The battery has reached a low battery 
level. When the battery has reached a critical battery level, 
the battery light begins blinking rapidly.

Off: The battery is not charging.

(7)

Power connector

Connects an AC adapter.

Left side

Use the illustration and table to identify the components on the left side of the computer.

8

Chapter 2   Components

Summary of Contents for ProBook x360 435 G7





























































































Reviews: