4.
Remove the top cover
(3)
from the display assembly.
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the rubber screw covers
(1)
. The rubber screw covers are available in the Display
Rubber Kit, spare part number 642785-001.
b.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the display bezel to the
display assembly.
c.
Flex the inside edges of the bottom edge
(1)
, the left and right sides
(2)
, and the
top edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
120
Chapter 4 Removal and replacement procedures
