manualshive.com logo in svg

HP ProBook 6445b - Notebook PC, User Manual, Page: 168 / 183

Share
Download
HP ProBook 6445b - Notebook PC User Manual Download Page 168

Enabling boot devices in Computer Setup

The computer will boot to a USB device or a NIC device only if the device has first been enabled in
Computer Setup.

To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these steps:

1.

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen.

2.

Press 

f10

 to enter BIOS Setup.

3.

To enable bootable media in USB drives or in drives inserted into an optional docking device (select
models only), use a pointing device or the arrow keys to select 

System Configuration

 

>

 

Device

Configurations

. Confirm that 

Enabled

 is selected next to 

USB legacy support

.

NOTE:

The USB Port option must be enabled in order to use USB legacy support. It is enabled

at the factory. If the port becomes disabled, reenable it by selecting 

System Configuration

 

>

 

Port

Options

, and then clicking 

Enabled

 next to 

USB Port

.

– or –

To enable a NIC device, select 

System Configuration

 

>

 

Boot Options

, and then click 

Enabled

next to 

PXE Internal NIC boot

.

4.

To save your changes and exit Computer Setup, click 

Save

 in the lower-left corner of the screen,

and then follow the on-screen instructions.

– or –

Use the arrow keys to select 

File

 

>

 

Save changes and exit

, and then press 

enter

.

Your changes go into effect when the computer restarts.

NOTE:

To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL)

server without using MultiBoot, press 

esc

 while the “Press the ESC key for Startup Menu” message is

displayed at the bottom of the screen, and then quickly press 

f12

.

158 Chapter 14   MultiBoot

Summary of Contents for ProBook 6445b - Notebook PC
























































































































































































Reviews:

No comments