manualshive.com logo in svg

HP ProBook 6445b - Notebook PC, User Manual, Page: 154 / 183

Share
Download
HP ProBook 6445b - Notebook PC User Manual Download Page 154

12 Backup and recovery

To protect your information, use the Backup and Restore Center to back up individual files and folders,
back up your entire hard drive (select models only), or create system restore points. In case of system
failure, you can use the backup files to restore the contents of your computer.

The Backup and Restore Center provides the following options:

●

Backing up individual files and folders

●

Backing up the entire hard drive (select models only)

●

Scheduling automatic backups (select models only)

●

Creating system restore points

●

Recovering individual files

●

Restoring the computer to a previous state

●

Recovering information using recovery tools

NOTE:

For detailed instructions, perform a search for these topics in Help and Support.

NOTE:

In case of system instability, HP recommends that you print the recovery procedures and save

them for later use.

144 Chapter 12   Backup and recovery

Summary of Contents for ProBook 6445b - Notebook PC
























































































































































































Reviews:

No comments