manualshive.com logo in svg

HP ProBook 4430s, Maintenance And Service Manual

The HP ProBook 4430s is a reliable and efficient laptop designed for professionals on the go. To help you make the most of its features, we offer a comprehensive user manual available for free download on our website. Accessible and convenient, our manual provides step-by-step instructions and valuable insights to optimize your ProBook experience.

Share
Download
background image

4.

Lift the fan out of the computer 

(3)

.

Reverse this procedure to install the fan.

NOTE:

To properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the left side of

the computer.

The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is

designed to turn on automatically when high temperature conditions exist. These conditions are affected

by high external temperatures, system power consumption, power management/battery conservation

configurations, battery fast charging, and software requirements. Exhaust air is displaced through the

ventilation grill located on the left side of the computer.

66

Chapter 4   Removal and replacement procedures

Summary of Contents for ProBook 4430s























































































































































Reviews:

No comments

Related manuals for ProBook 4430s

Brands by name

Popular brands

Load more brands