manualshive.com logo in svg

HP Pro 3400 Series, Maintenance And Service Manual

The HP Pro 3400 Series user manual is your essential guide to unleash the full potential of your device. Explore its features, specifications, and troubleshooting tips conveniently through the free download of Quickspecs manual. Access it effortlessly from manualshive.com, ensuring a seamless experience with your HP Pro 3400 Series.

Share
Download
background image

Using f11 recovery tools

CAUTION:

Using 

f11

 completely erases hard drive contents and reformats the hard drive. All files

that you have created and any software that you have installed on the computer are permanently
removed. The 

f11

 recovery tool reinstalls the operating system and HP programs and drivers that

were installed at the factory. Software not installed at the factory must be reinstalled.

To recover the original hard drive image using 

f11

:

1.

If possible, back up all personal files.

2.

If possible, check for the presence of the HP Recovery partition: From the Start screen, type 

C

,

and then select 

Computer

.

NOTE:

If the HP Recovery partition is not listed, you must recover your operating system and

programs using the Windows 8 operating system media, and the 

Driver Recovery

 media (both

purchased separately). For additional information, see 

Using Windows 8 operating system

media (purchased separately) on page 195

.

3.

If the HP Recovery partition is listed, restart the computer, and then press 

esc

 while the

company logo is displayed. The computer Startup Menu displays.

4.

Press 

f11

 to select the System Recovery option.

5.

Follow the on-screen instructions.

Using Windows 8 operating system media (purchased separately)

To order Windows 8 operating system media, go to 

http://www.hp.com/support

, select your country or

region, and follow the on-screen instructions. You can also order the media by calling support.

CAUTION:

Using Windows 8 operating system media completely erases hard drive contents and

reformats the hard drive. All files that you have created and any software that you have installed on
the computer are permanently removed. When reformatting is complete, the recovery process helps
you restore the operating system, as well as drivers, software, and utilities.

To initiate recovery using Windows 8 operating system media:

NOTE:

This process takes several minutes.

1.

If possible, back up all personal files.

2.

Restart the computer, and then follow the instructions provided with the Windows 8 operating
system media to install the operating system.

3.

When prompted, press any keyboard key.

4.

Follow the on-screen instructions.

After the repair is completed:

1.

Remove the Windows 8 operating system media, and then insert the 

Driver Recovery

 media.

2.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Backup and recovery in Windows 8 195

Summary of Contents for Pro 3400 Series



















































































































































































































Reviews:

No comments

Related manuals for Pro 3400 Series

Xerox WORKCENTRE C2424 Manual preview
WORKCENTRE C2424
Brand: Xerox Pages: 12
Xerox WorkCentre M118 Getting Started Manual preview
WorkCentre M118
Brand: Xerox Pages: 25
VeriFone GemStall User Manual preview
GemStall
Brand: VeriFone Pages: 25
Sanford Dymo Label v.8 User Manual preview
Dymo Label v.8
Brand: Sanford Pages: 122
deXlan TV Expert User Manual preview
TV Expert
Brand: deXlan Pages: 17
Brother BT-1000 User Manual preview
BT-1000
Brand: Brother Pages: 22
Brother iPrint&Scan Manual preview
iPrint&Scan
Brand: Brother Pages: 115
Minolta Fiery Z4 Operator'S Manual preview
Fiery Z4
Brand: Minolta Pages: 26
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Brand: Red Hat Pages: 26
Red Hat CERTIFICATE 7.2 RELEASE NOTES Release Note preview
CERTIFICATE 7.2 RELEASE NOTES
Brand: Red Hat Pages: 24
DeLorme XMap 7 GIS Getting Started Manual preview
XMap 7 GIS
Brand: DeLorme Pages: 29
GRASS VALLEY KAYAK HD Installation Planning Manual preview
KAYAK HD
Brand: GRASS VALLEY Pages: 60
Z3 Technology Z3-DM368-APP Manual preview
Z3-DM368-APP
Brand: Z3 Technology Pages: 8
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial preview
05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD
Brand: Autodesk Pages: 21
Autodesk 00128-051462-9340 - AutoCAD 2008 - PC Manual preview
00128-051462-9340 - AutoCAD 2008 - PC
Brand: Autodesk Pages: 48
Xerox Wide Format 6050 Customer Training Manual preview
Wide Format 6050
Brand: Xerox Pages: 50
FARONICS INSIGHT - TEACHER Quick Start Manual preview
INSIGHT - TEACHER
Brand: FARONICS Pages: 9
Xerox DocuShare 6.0 User Manual preview
DocuShare 6.0
Brand: Xerox Pages: 20

Brands by name

Popular brands

Load more brands