manualshive.com logo in svg

HP Pro 3400 Series, Maintenance And Service Manual

The HP Pro 3400 Series user manual is your essential guide to unleash the full potential of your device. Explore its features, specifications, and troubleshooting tips conveniently through the free download of Quickspecs manual. Access it effortlessly from manualshive.com, ensuring a seamless experience with your HP Pro 3400 Series.

Share
Download
background image

Installing Additional Drives

When installing drives, follow these guidelines:

●

The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA
connector on the system board labeled SATA0.

●

Connect an optical drive to the light blue SATA connector on the system board labeled SATA2.

●

Connect a media card reader to:

◦

HP Pro 3400/3410/3500: F_USB1 system board connector

◦

HP Pro 3405: F_USB2 system board connector

◦

HP Pro 3505: CARD_READER system board connector

◦

HP Pro 3515: F_USB3 system board connector

●

The power cables for the SATA drives connect directly to the power supply. The primary hard
drive connects to the power connector labeled P4. the primary optical drive connects to the
power connector labeled P3.

●

The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.

CAUTION:

To prevent loss of work and damage to the computer or drive:

If you are inserting or removing a drive, shut down the operating system properly, turn off the
computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby
mode.

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,
avoid touching the connector. For more information about preventing electrostatic damage, refer to

Electrostatic Discharge Information on page 42

.

Handle a drive carefully; do not drop it.

Do not use excessive force when inserting a drive.

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.

If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and
label the package “Fragile: Handle With Care.”

System Board Drive Connections

Refer to the following illustration and table to identify the system board drive connectors.

System Board Drive Connections (HP Pro 3400 shown)

Drives

65

Summary of Contents for Pro 3400 Series



















































































































































































































Reviews:

No comments

Related manuals for Pro 3400 Series

F-SECURE PSB Getting Started Manual preview
PSB
Brand: F-SECURE Pages: 18
Califone AV Tutor MCFBV1-D Specification preview
AV Tutor MCFBV1-D
Brand: Califone Pages: 1
AVIRA SECURITY MANAGEMENT CENTER 2.5 Manual preview
SECURITY MANAGEMENT CENTER 2.5
Brand: AVIRA Pages: 39
Xerox Document centre 490 Color Management Manual preview
Document centre 490
Brand: Xerox Pages: 102
D-Link DS-605 - VPN Client - PC User Manual preview
DS-605 - VPN Client - PC
Brand: D-Link Pages: 15
D-Link DSN-210-SW - SureSync Continuous Data Protection Datasheet preview
DSN-210-SW - SureSync Continuous Data Protection
Brand: D-Link Pages: 4
D-Link D-View 5.1 Quick Installation Manual preview
D-View 5.1
Brand: D-Link Pages: 56
D-Link D-View 6 Professional User Manual preview
D-View 6 Professional
Brand: D-Link Pages: 143
D-Link PS Admin User Manual preview
PS Admin
Brand: D-Link Pages: 136
D-Link D-View 5.1 User Manual preview
D-View 5.1
Brand: D-Link Pages: 279
Minolta DIMAGE VIEWER 2.1 Instruction Manual preview
DIMAGE VIEWER 2.1
Brand: Minolta Pages: 84
Toshiba Strata CTX ACD Application Manual preview
Strata CTX ACD Application
Brand: Toshiba Pages: 1
Toshiba Strata CIX WinCIX Technical Bulletin preview
Strata CIX WinCIX
Brand: Toshiba Pages: 5
Toshiba Strata CIX SoftIPT 2.1.2 Product Bulletin preview
Strata CIX SoftIPT 2.1.2
Brand: Toshiba Pages: 5
Toshiba Strata CS Release 7.0 Sales Bulletin preview
Strata CS Release 7.0
Brand: Toshiba Pages: 8
Toshiba Strata CIX SoftIPT 2.2 Product Bulletin preview
Strata CIX SoftIPT 2.2
Brand: Toshiba Pages: 10
Toshiba Strata CTX SoftIPT Technical Bulletin preview
Strata CTX SoftIPT
Brand: Toshiba Pages: 12
Toshiba Strata CIX Database Assistant Technical Bulletin preview
Strata CIX Database Assistant
Brand: Toshiba Pages: 7

Brands by name

Popular brands

Load more brands