HP PCIe U320, User Manual

Page: 26 / 61

Using the Con fi guration Tool
NOTE:
The HP StorageWorks U320e SCSI Host Bus Adapter is designed to operate properly using factory
settings. Entering invalid or incorrect settings when using an NVRAM con fi guration utility, such as the
ATTO Con fi guration Tool, may cause your host adapter to function incorrectly.
CAUTION:
Back up system data before installing or changing hardware con fi gurations.
To start the Con fi guration Tool:
1. Locate the application icon in the folder you created during installation.
2. Double-click the icon to start the application.
The main screen has three windows: Device Listing , Con fi guration Options , and Status .
Navigating the ATTO Con fi guration Tool
The left side of the Device Listing window lists all devices currently connected to the system.
• Expand the device tree by clicking the + to reveal additional detail on connected devices.
• Collapse the branch by clicking the – .
Information and options for a device highlighted in the device listing are presented in the Con fi guration
Options window in the right window pane.
The currently selected device determines the tabs and panels shown in the Device Listing . The Table 3
speci fi es the tabs that display for the each device type.
Table 3 Tabs displayed by device type
Tree Node Tabs displayed
Adapter
Basic Info, Flash, Advanced
Channel NVRAM, PCI info
SCSI Devices
Basic Info
Local Host
Basic Info
The following tabs display in the Con fi guration Options window when you select a speci fi c adapter
in the Device Listing window:
• The Basic Info tab provides basic information about the device currently highlighted in the device
listing; no changes are possible from this screen or information about the host when the Local
Host is highlighted.
• The Flash tab provides information about the current revision of the fl ash fi rmware loaded on the
highlighted host adapter.
Click the
Browse button at the bottom of the tab to search for new fl ash fi les on your system. Flash fi les
have fi lenames of the form
FlashBundle_2004_02_20.21P
.
• The Advanced tab is not supported for the HP StorageWorks U320e SCSI Host Bus Adapter
and will display a message.
When you select a speci fi c channel under an HP StorageWorks U320e SCSI Host Bus Adapter or ATTO
host adapter in the Device Listing, the NVRAM panel displays the NVRAM parameters applicable
26
Con fi guration tool