background image

Remove the speakers by lifting up on the clip on the right side speaker and lifting the speakers.
Carefully and gently lift the speaker wire connecting the left and right speakers.

NOTE:

The speaker connection cable was removed when removing the system board.

NOTE:

The speakers include rubber isolators that are installed in the screw holes. These

isolators are crucial to the performance of the speakers.

Reverse this procedure to install the speakers.

Display assembly

Display assembly

:

35.56 cm

 (14.0 in), high definition (HD), WLED, SVA BrightView flat display assembly for use with HP Pavilion Notebooks.

This display assembly is spared at the subcomponent level only.

35.56 cm

 (14.0 in), high definition (HD), WLED, SVA BrightView TouchSmart slim display assembly for use with HP Pavilion

TouchSmart Notebooks:

Aluminum with midnight black

734414-001

Flyer red

734410-001

Goji berry

736814-001

Hazel berry

736815-001

Mineral black

736813-001

Pearl white

734409-001

Raspberry

736816-001

88

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for Pavilion TouchSmart Notebook PC



































































































































Reviews: