HP Pavilion TouchSmart 14-f000 Page 23 Maintenance And Service Manual Download

Page: 23 / 91

Right side

Item

Component

Description

(1)

USB ports

Connects an optional USB device.

CAUTION:

While there are multiple USB ports on the

same side, only one USB port will able to support a high
power device at a time.

(2)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, any compatible digital or
audio device.

(3)

Memory card reader

Reads data from and writes data to digital memory cards
such as Secure Digital (SD).

●

Memory card reader

(4)

RJ-45 (network) jack

Connects a network cable.

(5)

AC adapter light

●

White: The AC adapter is connected and the battery
is charged.

●

Amber: The AC adapter is connected and the
battery is charging.

●

Off: The computer is using DC power.

(6)

Power connector

Connects an AC adapter.

Right side

Summary of Contents for Pavilion TouchSmart 14-f000




























































































Search results

Summary of Contents for Pavilion TouchSmart 14-f000

Reviews:

Related manuals for Pavilion TouchSmart 14-f000

Brands by name

Popular brands

HP Pavilion TouchSmart 14-f000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion TouchSmart 14-f000

Reviews:

Related manuals for Pavilion TouchSmart 14-f000

Brands by name

Popular brands