HP Pavilion TouchSmart 14-f000 Page 12 Maintenance And Service Manual Download

Page: 12 / 91

Category

Description

Memory

Two customer-accessible/upgradable memory module slots

DDR3-1333-MHz dual channel support (DDR3L-1600 downgrade to DDR3-1333)

DDR3-1600MHz Single Channel Support

Supports 8192-MB of system RAM in the following configurations:

●

8192-MB (4096-MB×2; not supported on computer models equipped with a 32-
bit operating system)

●

6144-MB (2048-MBx1 + 4096-MB×1; not supported on computer models
equipped with a 32-bit operating system)

●

4096-MB (2048-MB×2; not supported on computer models equipped with
Windows 7, 32-bit operating system)

●

4096-MB (4096-MB×1; not supported on computer models equipped with
Windows 7, 32-bit operating system)

Hard drive

Supports 6.35-cm (2.5-in) hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in)
thicknesses (all hard drives use the same bracket)

Customer-accessible

Serial ATA

Supports the following hard drives:

●

1-TB, 5400-rpm, 9.5-mm

●

750-GB, 5400-rpm, 9.5-mm

●

640-GB, 5400-rpm, 9.5-mm

●

500-GB, 5400-rpm, 9.5-mm

●

320-GB, 5400-rpm, 9.5-mm

Optical drive

External

Serial ATA

12.7-mm tray load

Supports DVD±RW Double-Layer with SuperMulti Drive

Audio and video

Two speakers

DTS

sound

Supports Microsoft® premium requirements

VGA webcamera (fixed, no tilt with activity LED; 1280×720 by 30 frames per second)

Two digital microphones with beam-forming, echo cancelling and noise suppressing
software.

Supports nuance voice recognition

Ethernet

Integrated 10/100 network interface card (NIC)

Chapter 1 Product description

Summary of Contents for Pavilion TouchSmart 14-f000




























































































Search results

Summary of Contents for Pavilion TouchSmart 14-f000

Reviews:

Related manuals for Pavilion TouchSmart 14-f000

Brands by name

Popular brands

HP Pavilion TouchSmart 14-f000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion TouchSmart 14-f000

Reviews:

Related manuals for Pavilion TouchSmart 14-f000

Brands by name

Popular brands