Reverse this procedure to install the heat sink.
Power connector cable
Description
Spare part number
Power connector cable
722907-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 30
), and then remove the following cables:
a.
Keyboard (see
Keyboard on page 31
).
b.
Top cover (see
Top cover on page 33
).
c.
Fan (see
Fan on page 42
).
d.
WLAN module (see
WLAN module on page 44
).
e.
System board (see
System board on page 49
).
Remove the power connector cable:
1.
Turn the system board upside down, with the rear toward you.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Pavilion TouchSmart 14-f000
