64
HP Pavilion home PC
Filename: sb3rwqs.doc Title: Complete with index
Template: HP-Print2K.dot Author: billm Last Saved By: kimt
Revision #: 155 Page: 64 of 142 Printed: 01/02/03 04:01 PM
To use the 6-In-1
memory card reader
Important:
CompactFlash and Microdrive are keyed
and cannot be inserted incorrectly. Insert the
receptacle edge (holes) of this media into the slot.
For the two-slot reader, the Secure Digital (SD)
card, the MultiMediaCard (MMC), and the
Memory Stick (MS) card must be inserted upside
down (gold connector fingers face up). Note the
direction of the notched corner on the media.
1
Insert the media into the card slot until it stops.
The in-use light (
A
) on the card reader lights,
and the PC automatically detects the media.
2
The PC opens a window so you can access the
media contents. You can copy files from or to
the media.
3
When you are done, check that the in-use light
is on but not blinking, and then remove the
media. A steady light indicates that the PC is
not accessing the media.
Warning:
Do not try to remove media
when the In-use light is blinking. Doing
so may cause loss of data.
A
E
D
B
C
Card
Insert
Into 4-slot
reader
CompactFlash
type I media
Receptacle
edge (holes)
C (lower left)
CompactFlash
type II media
Receptacle
edge (holes)
C (lower left)
IBM Microdrive
disk drive
Receptacle
edge (holes)
C (lower left)
Secure Digital
(SD) Memory
Card
Face up
D (upper
right)