Quick Start Guide
31
Filename: sb3rwqs.doc Title: Complete with index
Template: HP-Print2K.dot Author: billm Last Saved By: kimt
Revision #: 149 Page: 31 of 142 Printed: 01/02/03 10:27 AM
Basics
To configure multi-channel
audio output for the DVD player
Note:
WinDVD
™
is set up for two (stereo) speaker output.
In order to hear all speakers on multi-channel DVD
movies, change the audio properties for WinDVD
so that they match your speaker configuration
(set in the previous procedure) and the recorded
DVD capability.
1
Insert a DVD or start InterVideo WinDVD
Player. (See “Playing a DVD” on page 74.)
2
Right-click anywhere in the WinDVD video
window, and then click
Setup
.
3
Click the
Audio
tab.
4
Click the option for the number of speakers
that matches your multi-channel speaker
system. Click
Apply
.
You can then test the speakers: click the
Test
button and the WinDVD control panel shows
the speaker number being used. Click
Stop
.
5
Click
OK
.
Note:
If you want to play a stereo DVD, repeat
these steps (1 through 5) and change the
audio properties for WinDVD to match the
DVD output.
To use the microphone
with multi-channel audio
The multi-channel speaker system connects to
the PC using the Microphone, Audio (Line) In,
and Audio (Line) Out connectors on the back
of the PC.
Your PC may have another microphone connector
in the front of the PC under the access door.
If present, this microphone connector is ready
to use.
To use the back microphone connector, you
must disconnect your multi-channel speakers
system and select 2 channel audio setup.
To change the audio configuration, see
“To configure multi-channel audio output
for speakers configuration” on page 30.
