Quick Start Guide
5
Filename: sb3rwqs.doc Title: Complete with index
Template: HP-Print2K.dot Author: billm Last Saved By: kimt
Revision #: 149 Page: 5 of 142 Printed: 01/02/03 10:27 AM
Setup
Follow the setup poster to set up the PC in
your work area, and then read the topics in
this section to turn on the PC for the first time
and to finish the registration process (select
models only).
After registering, install any software programs
that came on CDs or DVDs included in the PC
box (select models only).
Note:
Some programs are preinstalled on the PC. Before
installing a program, check to see if it is already
installed on your system.
Add any printer, scanner, camera, or other
peripheral equipment you have for your system.
Many peripherals, external devices, memory,
and add-in cards are Plug and Play.
Note:
When you add or remove a Plug and Play
peripheral, the PC recognizes it and obtains the
driver for the device.
Turning On the PC
for the First Time
After you’ve completed connecting the steps on
the setup poster, you’re ready to turn on the PC.
First, press the Power button on the monitor.
Then, press the On button on the front of the PC.
Note:
The power supply is pre-set for the country/region
in which you purchased the PC. If you move,
please check the voltage requirements before
plugging your PC into an AC power outlet.
Setting Up the PC
