TouchPad click board
Description
Spare part number
TouchPad click board
926530-001
TouchPad click board cable
928882-001
TouchPad cable
926518-001
Before removing the TouchPad click board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
).
To remove the TouchPad click board:
1.
Disconnect the TouchPad cable from the TouchPad board (1) and the system board cable from the
TouchPad click board (2).
2.
Remove the three Phillips PM2.0×4.0 screws (3) that secure the TouchPad click board to the computer.
3.
Remove the board from the computer (4).
Reverse this procedure to install the TouchPad click board.
Component replacement procedures
51
Summary of Contents for PAVILION Gaming 17-ak000
