HP PAVILION Gaming 17-ak000 Maintenance And Service Manual Download

Page: 37 / 108

Removal and replacement procedures for
Customer Self-Repair parts

CAUTION:

The Customer Self-Repair program is not available in all locations. Installing a part not supported

by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Component replacement procedures

NOTE:

Please read and follow the procedures described here to access and replace Customer Self-Repair

parts successfully.

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer.

This chapter provides removal and replacement procedures for Customer Self-Repair parts.

Component replacement procedures

Summary of Contents for PAVILION Gaming 17-ak000













































































































Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands

HP PAVILION Gaming 17-ak000, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands