HP PAVILION Gaming 17-ak000 Page 55 Maintenance And Service Manual Download

Page: 55 / 108

Solid-state drive

Description

Spare part number

256-GB solid-state drive

865902-015

128-GB solid-state drive

827560-046

Before removing the solid-state drive, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Remove the battery (see

Battery on page 30

Remove the optical drive (see

Optical drive on page 31

Remove the bottom cover (see

Bottom cover on page 39

Remove the solid-state drive:

Remove the Phillips PM2.0×2.0 screw (1) that secures the drive to the system board.

Remove the drive (2) by pulling it away from the connector.

NOTE:

Solid-state drives are designed with notches to prevent incorrect insertion.

Reverse this procedure to install the solid-state drive.

Component replacement procedures

Summary of Contents for PAVILION Gaming 17-ak000













































































































Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands

HP PAVILION Gaming 17-ak000, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands