HP Pavilion dv7-6c00 User Manual Download Page 42

Page: 42 / 117

Icon

Key

Description

f11

Mutes or restores speaker sound.

f12

Turns the wireless feature on or off.

NOTE:

A wireless network must be set up before a wireless connection is possible.

Using the hotkeys

A hotkey is a combination of the

key

(1)

and either the

esc

key

(2)

, the

key

(3)

, or the

spacebar

(4)

To use a hotkey:

▲

Briefly press the

key, and then briefly press the second key of the hotkey combination.

Function

Hotkey

Description

Display system information.

esc

Displays information about system hardware components and the
system BIOS version number.

Control the bass settings.

Enables or disables the Beats Audio bass settings (select models
only).

Beats Audio is an enhanced audio profile that provides a deep,
controlled bass while maintaining a clear sound. Beats Audio is
enabled by default.

You can also view and control the bass settings through the Windows
operating system. To view and control the bass properties:

Select

Start

Control Panel

Hardware and Sound

Beats

Audio Control Panel

Turn the TouchPad accent
light on or off.

spacebar

Turns the TouchPad accent light on or off when the TouchPad is on.

NOTE:

The TouchPad accent light is turned on at the factory. To

extend battery life, turn off the TouchPad accent light.

Chapter 5 Pointing devices and keyboard

Summary of Contents for Pavilion dv7-6c00






















































































































Search results

Summary of Contents for Pavilion dv7-6c00

Reviews:

Related manuals for Pavilion dv7-6c00

Brands by name

Popular brands

HP Pavilion dv7-6c00, User Manual

Search results

Summary of Contents for Pavilion dv7-6c00

Reviews:

Related manuals for Pavilion dv7-6c00

Brands by name

Popular brands