HP Pavilion dm1-4300 User Manual Download Page 21

Page: 21 / 86

Bottom

Component

Description

(1)

Battery bay

Holds the battery.

(2)

SIM slot (select models only)

Supports a wireless subscriber identity module
(SIM). The SIM slot is located inside the battery
bay.

(3)

Battery/service door latch

Releases the battery from the battery bay and the
service door from the computer.

(4)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically

to cool internal components and prevent
overheating. It is normal for the internal fan to
cycle on and off during routine operation.

(5)

Service door

Provides access to the hard drive bay, a memory
module slot, the subscriber identity module (SIM)
slot (select models only), and the wireless local
area network (WLAN) module.

Bottom

Summary of Contents for Pavilion dm1-4300























































































Search results

Summary of Contents for Pavilion dm1-4300

Reviews:

Related manuals for Pavilion dm1-4300

Brands by name

Popular brands

HP Pavilion dm1-4300, User Manual

Search results

Summary of Contents for Pavilion dm1-4300

Reviews:

Related manuals for Pavilion dm1-4300

Brands by name

Popular brands