•
Verify that electrical service wiring has been installed at the server’s predetermined location.
Refer to the respective product specifications for detailed requirements.
•
Verify of any additional support equipment is properly installed and operational.
At installation time, the HP representative will supervise the delivery and unpacking of the equipment.
NOTE:
No part of the installation, from unloading the crated server from the delivery vehicle to
unpacking and placement, should be performed without the supervision of an HP representative.
This is a fundamental requirement for the safety of both the equipment and personnel.
Preparing a Pre-Installation Site Planning Guide
Prior to installation, the customer will complete a systems planning document such as the 3PAR
Systems Assurance and Pre-Site Planning Guide in cooperation with the local HP 3PAR Sales
Representative or HP 3PAR Systems Engineer.
The systems planning guide is a working document that contains the following information:
•
Contact information for customer personnel and for HP technical sales, support, and service
personnel
•
Implementation project plan
•
Configuration information for the storage system to be installed, including system configuration
diagrams
•
Shipping and delivery details and requirements
•
Management workstation, service processor, and network information
•
Description of the customer environment
•
Volume and RAID level planning information
•
Customer training project plan
•
Additional notes and comments regarding installation
•
Current support matrix
•
System technical specifications
•
Systems Acceptance Certificate
•
Customer Services installation checklist
Storage System Cabinet Shipping Containers
A separate shipping container holds each storage system cabinet while drive magazine shipping
containers hold a maximum of 30 drive magazines each.
Shipping container measurements are as follows:
•
Cabinet crate (one per 2M rack cabinet): Height: 86 in. (218.5 cm) x Width: 42 in. (106.7
cm) x Depth: 48 in. (121.9 cm)
Approximate shipping weight: 1172 lb (531.6 kg)
•
Drive magazine container (one per 3 drive magazines): Height 13 in. (33.1 cm) x Width 11
in. (28 cm) x Depth 27 in. (68.6 cm)
1
Approximate shipping weight: 33.8 lb (15.4 kg)
1. For systems shipped internationally and for systems with fewer than 25 drive magazines, magazines are shipped in
boxes. Each box contains three magazines.
Storage System Cabinet Shipping Containers
15
Summary of Contents for P10000
Page 30: ...Figure 12 Power Supplies Within the Power Domains 30 Power Requirements ...
Page 59: ...French battery notice German battery notice Battery replacement notices 59 ...
Page 60: ...Italian battery notice Japanese battery notice 60 Regulatory compliance notices ...
Page 61: ...Spanish battery notice Battery replacement notices 61 ...
