HP OmniBook Troubleshooting And Self-Repair Manual Download Page 3 | Manualshive

Page: 3 / 57

background image

ii

zt1100/xz100 and xt1000 Series

Troubleshooting and Self-Repair Guide

Notice

This manual and any examples contained herein are provided “as is” and are subject to change without
notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability and fitness for a particular
purpose. Hewlett-Packard Co. shall not be liable for any errors or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual or the examples herein.

Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations
shall not apply to Consumer transactions in Australia and the United Kingdom and shall not affect the
statutory rights of Consumers.

© Copyright Hewlett-Packard Company 2000–2002. All rights reserved. Reproduction, adaptation, or
translation of this manual is prohibited without prior written permission of Hewlett-Packard Company,
except as allowed under the copyright laws.

The programs that control this product are copyrighted and all rights are reserved. Reproduction,
adaptation, or translation of those programs without prior written permission of Hewlett-Packard Co.
is also prohibited.

Portions of the programs that control this product may also be copyrighted by Microsoft Corporation,
SystemSoft Corp., Insyde Software Corporation, S3 Graphics Incorporated, and Adobe Systems
Incorporated. See the individual programs for additional copyright notices.

This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Microsoft®, MS-DOS®, and Windows® are U.S. registered trademarks of Microsoft Corporation.
Pentium® and the Intel Inside logo are U.S. registered trademarks and Celeron™ and SpeedStep™
are U.S. trademarks of Intel Corporation. Adobe® and Acrobat® are trademarks of Adobe Systems
Incorporated.

All certifications may not be completed at product introduction.

This equipment is subject to FCC rules. It will comply with the appropriate FCC rules before final
delivery to the buyer.

Hewlett-Packard Company
HP Notebook Customer Care
1000 NE Circle Blvd., MS 425E
Corvallis, OR 97330, U.S.A.

Edition History

Edition 1.........................January 2002

«
1
2
3
4
5
...
»

Summary of Contents for OmniBook


























































Reviews:

No comments

Related manuals for OmniBook

Brand: Radio Shack Pages: 12

Brand: Targus Pages: 23

Brand: La Crosse Technology Pages: 46

Brand: cable matters Pages: 12

Brand: iLive Pages: 12

Brand: Ventus Pages: 100

Brand: Gill Instruments Pages: 91

F5X016 - Home Kit For Xpress

Brand: Belkin Pages: 12

Brand: ankmax Pages: 17

Brand: Goodmans Pages: 10

Brand: La Crosse Pages: 14

Brand: TechnoTrade Pages: 24

Brand: yeedi Pages: 29

Brand: La Crosse Technology Pages: 26

Brand: La Crosse Technology Pages: 7

Brand: La Crosse Technology Pages: 20

Brand: Aft Pages: 11

Brand: ACU-RITE Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands