background image

zt1100/xz100 and xt1000 Series 

Product Information 

11 

Troubleshooting and Self-Repair Guide 

Resetting the Notebook 

If Windows or the notebook stops responding and you cannot turn the notebook off, try the following 
in the order listed. Press the power button to restart. 

• 

If possible, restart or turn off the notebook from within Windows: click Start, Turn Off Computer, 
Restart (or Turn Off).  

• 

Press Ctrl+Alt+Del, then click Shut Down, Restart (or Turn Off). 

• 

Press and hold the power button for about four seconds. 

• 

Use a pen or straightened paper clip to press the reset switch on the back of the notebook. 

 

 

Figure 7. Pressing the Reset Switch 

Changing the Boot Device 

The notebook normally boots from its internal hard disk. You can also boot the notebook from an 
external USB floppy disk drive (optional accessory), the CD/DVD drive, or a local area network 
(LAN). 

1.  Restart the notebook: click Start, Turn Off Computer, Restart. 

2.  When the HP logo appears, press Esc to display the Boot menu. 

3.  Use the arrow keys to select the boot device, and press Enter. 

If you want to boot from a specific device whenever it is present, change the boot order using the 
BIOS configuration utility—see “Using the BIOS Configuration Utility” on page 33. 

Summary of Contents for OmniBook


























































Reviews: