5 Removal and replacement
procedures
CAUTION:
Components described in this chapter should only be accessed by an authorized service
provider. Accessing these parts can damage the tablet and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to
http://partsurfer.hp.com
, select your country or region, and
then follow the on-screen instructions.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 19 screws that must be removed, replaced, and/or loosened when servicing the
tablet. Make special note of each screw size and location during removal and replacement.
Back cover
Description
Spare part number
Back cover (includes shielding):
For use only on HP Pro Tablet 610 tablet models
763533-001
For use only on HP Omni 10 tablet models
739813-001
10.1-in, AG, LED, WUXGA, TouchScreen, display assembly
NOTE:
The display assembly does not include the display panel cable. The display panel cable is available using spare part
number 739817-001.
For use only on HP Pro Tablet 610 tablet models
763536-001
For use only on HP Omni 10 tablet models
739812-001
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
20
Chapter 5 Removal and replacement procedures
Summary of Contents for Omni10
Page 4: ...iv Safety warning notice ...
