Display panel cable
Description
Spare part number
Display panel cable
739817-001
Before removing the display panel cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 20
).
5.
Disconnect the battery cable from the system board (see
Power button board on page 22
), and
then remove the following components:
a.
Volume button board (see
Volume button board on page 23
)
b.
Audio board (see
Audio board on page 30
)
c.
Battery (see
Battery on page 33
)
d.
SIM/card reader board (see
SIM/card reader board on page 37
)
Remove the display panel cable:
1.
Release the ZIF connector
(1)
to which the display panel cable is attached, and then disconnect
the display panel cable from the system board.
2.
Release the ZIF connector
(2)
to which the display panel cable is attached, and then disconnect
the display panel cable from the display assembly.
40
Chapter 5 Removal and replacement procedures
Summary of Contents for Omni10
Page 4: ...iv Safety warning notice ...
