Remove the back cover:
CAUTION:
Before turning the display assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the
display assembly.
1.
Place the tablet on a flat surface, display panel side down, with the power button toward you.
CAUTION:
When inserting the plastic tool into the tablet as described in Step 2, make sure not
to insert the tool into the power button area. Failure to follow this caution can result in damage to
the tablet.
2.
Insert a thin, plastic tool
(1)
between the back cover and the display assembly. The first insertion
point should be between the power button
(2)
and the middle of the top edge
(3)
of the
back cover.
3.
Separate the top edge of the back cover
(4)
from the display assembly.
CAUTION:
When removing the back cover, make sure the bottom edge, opposite the power
button, is the last edge removed. Failure to follow this caution can result in damage to the tablet.
4.
Remove the back cover
(5)
.
Reverse this procedure to install the back cover.
CAUTION:
When installing the back cover, make sure the bottom edge, opposite the power button,
is the first edge installed. Failure to follow this caution can result in damage to the tablet.
Back cover
21
Summary of Contents for Omni10
Page 4: ...iv Safety warning notice ...
