8.
To remove the top bracket, pull the bracket off the top of the display rear cover.
9.
If you need to remove the camera module:
a.
Use a tool to detach the camera module (1) from the display back cover. (The module is attached
with double-sided adhesive.)
b.
Disconnect the cable from the module (2). Note that the cable routes under the module. The
camera module is available as spare part number M57138-001.
10.
If you need to remove the hinge covers from the hinges:
a.
Remove the rubber pieces from the inside of each hinge cover (1).
b.
Remove the Phillips M1.6 × 2.0 screw from the inside of each hinge cover (2).
c.
Slide the hinge covers off the hinges (3).
The hinge covers are available as spare part number M57120-001.
Hinge cover rubber caps are available as spare part number M57121-001.
Component replacement procedures
55
Summary of Contents for OMEN 17
Page 4: ...iv Safety warning notice ...