manualshive.com logo in svg

HP OMEN 17, Maintenance And Service Manual, Page: 14 / 86

Share
Download
HP OMEN 17 Maintenance And Service Manual Download Page 14

Table 2-2

  Left-side components and their descriptions

Component

Description

(1)

Power connector 

Connects an AC adapter.

(2)

AC adapter and battery light 

●

White: The AC adapter is connected and the battery is fully 
charged.

●

Blinking amber: The AC adapter is disconnected and the 
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is 
charging.

●

Off: The battery is not charging.

(3)

RJ-45 (network) jack/status lights 

Connects a network cable.

●

White: The network is connected.

●

Amber: Activity is occurring on the network.

(4)

USB SuperSpeed port with HP Sleep and Charge  Connects a USB device, provides high-speed data transfer, and 

charges small devices (such as a smartphone), even when the 
computer is off.

NOTE:

Use a standard USB Type-A charging cable or cable 

adapter (purchased separately) when charging a small external 
device.

(5)

Dual-Mode DisplayPort™ connector 

Connects an optional digital display device, such as a high-
performance monitor or projector.

(6)

HDMI port 

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component, 
or a high-speed High-Definition Multimedia Interface (HDMI) 
device.

(7)

USB Type-C® Thunderbolt™ port with HP Sleep 
and Charge 

Connects a USB device, provides high-speed data transfer, and 
charges small devices (such as a smartphone), even when the 
computer is off.

NOTE:

Use a standard USB Type-C charging cable or cable 

adapter (purchased separately) when charging a small external 
device.

– and –

Connects a display device that has a USB Type-C connector, 
providing DisplayPort output.

NOTE:

Your computer might also support a Thunderbolt 

docking station.

(8)

Audio-out (headphone)/Audio-in (microphone) 
combo jack 

Connects optional powered stereo speakers, headphones, 
earbuds, a headset, or a television audio cable. Also connects an 
optional headset microphone. This jack does not support 
optional standalone microphones.

6

Chapter 2   Getting to know your computer

Summary of Contents for OMEN 17























































































Reviews:

No comments