manualshive.com logo in svg

HP OMEN 17, Maintenance And Service Manual, Page: 52 / 86

Share
Download
HP OMEN 17 Maintenance And Service Manual Download Page 52

3.

Disconnect the cable from the ZIF connector on the bottom of the board (3).

Reverse this procedure to install the USB board.

System board

To remove the system board, use these procedures and illustrations.

Table 5-13

  System board descriptions and part numbers

Description

Spare part number

System board (includes processor):

All system boards use the following part numbers:

xxxxxx-001: Non-Windows operating system

xxxxxx-601: Windows 10 operating system

Intel Core i9-11900H processor and NVIDIA GeForce RTX 3080 graphics (16 GB)

M73505-xx1

Intel Core i9-11900H processor and NVIDIA GeForce RTX 3080 graphics (8 GB)

M57135-xx1

Intel Core i9-11900H processor and NVIDIA GeForce RTX 3070 graphics

M57137-xx1

Intel Core i7-11800H processor and NVIDIA GeForce RTX 3080 graphics (16 GB)

M73504-xx1

Intel Core i7-11800H processor and NVIDIA GeForce RTX 3070 graphics

M57136-xx1

Intel Core i7-11800H processor and NVIDIA GeForce RTX 3060 graphics

M57133-xx1

Intel Core i5-11400H processor and NVIDIA GeForce RTX 3060 graphics

M57132-xx1

Before removing the system board, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 29

).

2.

Remove the bottom cover (see 

Bottom cover on page 29

).

3.

Remove the battery (see 

Battery on page 30

).

4.

Remove the heat sink (see 

Heat sink on page 38

).

44

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for OMEN 17























































































Reviews:

No comments