background image

B–2

Maintenance and Service Guide

Software Backup and Recovery

Backing Up the System

Using HP Backup and Restore Manager, you can

Back up specific files and folders.

Back up the entire system.

Back up modifications since your last backup, using 
HP system restore points.

Schedule backups.

Backing Up Specific Files or Folders

You can back up specific files or folders to the hard drive, to an 
optional external hard drive, or to discs.

This process will take several minutes, depending on the file 
size and the speed of the computer.

To back up specific files or folders:

1. Select 

Start > All Programs > HP Backup & Recovery > 

HP Backup and Recovery Manager

.

2. Click 

Next

.

3. Click 

Back up to protect system settings and important 

data files

, and then click 

Next

.

4. Click 

Back up individual files and folders

, and then click 

Next

.

The Backup Wizard opens.

5. Click 

Next

.

6. Click 

Backup selected files from most common locations 

(Recommended)

.

– or –

Click 

Advanced Backup (Experienced users)

 to access 

advanced filtering techniques.

7. Click 

Next

.

8. Follow the on-screen instructions.

Summary of Contents for Nw9440 - Compaq Mobile Workstation











































































































































































































































































Reviews: