HP Nw9440 - Compaq Mobile Workstation Maintenance And Service Manual Download

Page: 134 / 266

5–34

Maintenance and Service Guide

Removal and Replacement Procedures

5.16 LED Board

1. Prepare the computer for disassembly (

Section 5.3

2. Remove the switch cover (

Section 5.15

3. Remove the four Torx8 T8M2.5×4.0 screws

and the

Torx8 T8M2.5×19.0 screw

that secure the LED board to

the computer.

4. Lift up on the LED board

between the volume decrease

and volume increase buttons to disconnect the LED board
from the system board.

5. Remove the LED board.

Removing the LED Board

Reverse the above procedure to install the LED board.

LED Board Spare Part Number Information

LED board (includes LED board cable)

409957-001

Summary of Contents for Nw9440 - Compaq Mobile Workstation











































































































































































































































































Search results

Summary of Contents for Nw9440 - Compaq Mobile Workstation

Reviews:

Related manuals for Nw9440 - Compaq Mobile Workstation

Brands by name

Popular brands

HP Nw9440 - Compaq Mobile Workstation, Maintenance And Service Manual

Search results

Summary of Contents for Nw9440 - Compaq Mobile Workstation

Reviews:

Related manuals for Nw9440 - Compaq Mobile Workstation

Brands by name

Popular brands