manualshive.com logo in svg

HP Nw9440 - Compaq Mobile Workstation, Maintenance And Service Manual, Page: 16 / 266

Share
Download
HP Nw9440 - Compaq Mobile Workstation Maintenance And Service Manual Download Page 16

1–10

Maintenance and Service Guide

Product Description

The external components on the left side of the computer are 
shown below and described in Table 1-3.

Left-Side Components

Table 1-3

Left-Side Components

Item

Component

Function

1

Exhaust vent

Provides airflow to cool internal 
components.

Ä

To prevent overheating, do not 
obstruct vents. Do not allow a hard 
surface, such as a printer, or a soft 
surface, such as pillows, thick rugs, 
or clothing, to block airflow.

2

Smart Adaptor power 
connector

Connects an AC adapter or an optional 
power adapter.

3

External monitor port

Connects an optional VGA external monitor 
or projector.

4

S-Video-out jack

Connects an optional S-Video device, such 
as a television, VCR, camcorder, projector, 
or video capture card.

5

USB ports (2)

Connect USB 1.1- and 2.0-compliant 
devices to the computer using a standard 
USB cable, or connect an optional External 
MultiBay II to the computer. The MultiBay II 
must also be connected to an external 
power source.

Summary of Contents for Nw9440 - Compaq Mobile Workstation











































































































































































































































































Reviews:

No comments