Front I/O and USB Panel Housing Assembly
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 29
).
2.
Remove the access panel (
Access Panel on page 30
)
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel (
Front Bezel on page 31
).
5.
Unplug the four cables that connect the assembly to the system board. The assembly cables
connect to the following system board connectors:
●
JAUD1 – yellow
●
J1394_1 – red
●
JUSB1 – white
●
JUSB3 – black
6.
Remove the screw
(1)
that secures the housing to the chassis, slide the housing up
(2)
, and then
pull the assembly away from the chassis while guiding the cables through the hole in the chassis.
To install the housing assembly, reverse the removal procedures.
Front I/O and USB Panel Housing Assembly
57
